AESwaveAnswer
Jul 21, 2021 - 09:30 AM
Pico CAN test box has LEDs on every pin and uses standard banana plug sockets which require and adapter (included) to use with most scope test leads that come with shrouded banana plugs.
LineSpi BoB has LEDs on Power, Ground, and common communication circuits. It accepts shrouded banana plugs with no adapters. It has a switch to completely remove the LEDs from the comm circuit during resistance and scope testing. A voltage display can be added as well as a pin-16 disconnect switch will will allow you to power up the box or scan tool even if the cars OBD2 port has a no power or a shorted circuit.
LineSpi BoB has LEDs on Power, Ground, and common communication circuits. It accepts shrouded banana plugs with no adapters. It has a switch to completely remove the LEDs from the comm circuit during resistance and scope testing. A voltage display can be added as well as a pin-16 disconnect switch will will allow you to power up the box or scan tool even if the cars OBD2 port has a no power or a shorted circuit.
Source: SA
