Answer
Nov 19, 2018 - 09:00 AM
Yes, the WPS500 will work well with any Snap On scope.
You will not be able to use the Snap On pressure transducer presets. All readings will be shown as voltage.
For instance on:
Range 1 (0-500psi) the conversion is 1V=100psi.
Range 2 (0-50psi) conversion is 1V=10psi
Range 3 (0-5psi) the conversion is 1V=1psi.
So if you are performing an in-cylinder compression waveform, a reading of 1.20v would be 120 psi.
You will not be able to use the Snap On pressure transducer presets. All readings will be shown as voltage.
For instance on:
Range 1 (0-500psi) the conversion is 1V=100psi.
Range 2 (0-50psi) conversion is 1V=10psi
Range 3 (0-5psi) the conversion is 1V=1psi.
So if you are performing an in-cylinder compression waveform, a reading of 1.20v would be 120 psi.
Source: SA
Add New Comment